Genuine Lindberg bridge, ordered to your frame
We order every bridge from Lindberg to the same four choices Lindberg uses: design, clip length, size and colour. As an authorised Lindberg dealer, you get the original part, not a copy.
Order your Lindberg Spirit bridge in four steps
These are the same four choices Lindberg asks for when a bridge is ordered. Pick them in the boxes above. If you get stuck on any of them, email us a photo of your frame and we will tell you exactly what to choose.
Design
Look at your frame from the front. The bridge is the piece that crosses your nose.
Clip length
The clip holds the lens, so it has to match how thick your lens is at the edge where the bridge clips on. Measure there, not at the centre of the lens.
Size
Lindberg sizes the bridge by the gap between the two lenses, measured from the top. Your frame size reads like 52□M or 52□20. The letter or number after the box is your bridge size.
| Size | Gap between the lenses |
|---|---|
| S | about 18 mm |
| M | about 20 mm |
| L | about 22 mm |
| XL | about 24 mm |
Colour
Each colour comes polished or silk matt. You can also pick your colour here. Choose the finish, then tap your colour, and it goes into the Colour box at the top of the page. Polished codes start with P.
Polished codes start with a P: P10 is polished silver, PGT is polished gold. Silk matt codes are the code on its own: 10 is matt silver, GT is matt gold.
The colour code is printed on the inside of the temple arm. Swatches are Lindberg's own. Colours on screen are a guide, as every Lindberg finish is made by hand.
Fitting your new bridge
Complete your repair
Common questions
Is this a genuine Lindberg bridge?
Yes. We order it from Lindberg through our authorised dealer account, made to the design, clip length, size and colour you choose. We never supply copies.
How do I tell round from round half eye wire?
Round has a clip at each end that grips the lens. Round half eye wire has no clips: the arch joins a fine wire that runs along the top edge of each lens. If your frame has that wire, choose round half eye wire.
I can't read my bridge size. What now?
Measure the gap between the two lenses at the bridge. About 18 mm is S, 20 mm is M, 22 mm is L and 24 mm is XL. If you are between two, email us a photo with a ruler beside the frame and we will confirm.
What if I choose the wrong clip length?
A clip that is too short will not grip a thick lens, and one that is too long leaves the lens loose. If you are not sure how thick your lens edge is, choose Sunglasses UK to fit and we will measure the lens when your frame arrives.
Can I send my frame in instead?
Yes. Choose Sunglasses UK to fit and we will email you a prepaid Royal Mail label. We fit the bridge in our workshop and post the frame back to you.